[- HOME -] [ steam iron ] [ steam generator with irons: 5 liter - 2.5 liter - 1.4 liter ] [ electric steam generator ] [blowing & vacuum tables ]  [ accessories ]

Mod. PS09/D - PS08/D - PS05/B - PS04/B - PS25 Professional Stainless Steel Ironing Machine with separated Boiler of 2,5 Liters

The professional steam irons with separated boiler are ironing machines that, for their architecture: small and practical and their operating system, are well used in both the household and professional sector.

 As a matter of fact, their operating system and their components have been designed for irons providing industrial performances, but implemented into a structure fitted to satisfy requirements of   both household and professional sector.

As a distinguishing feature, the structure has been given a rounded shape so to appear more harmonious and elegant. In the end the handle in the upper side of the chassis makes its moving easier.

The boiler is made of stainless steel so as to be limestone-proof even with tap water. It has a capacity of 2,0 liters permitting to iron for about two hours. Its internal structure is designed to get the “right water filling” thus making the formation of a steam chamber possible.

The components (all replaceable individually):

• copper heating element plunged into water for electric conservation

•  pressure switch to a steady control of the pressure 

• safety thermostat with probe for a direct control of the heating element, it intervenes in case of a sudden rise of the temperature

• steam switch

• low water red light

• safety cap with safety valve

• external solenoid valve to regulate the steam quantity (available only for the model PS05/B and PS08/D)

• gauge to display the steam pressure (available only for the model PS09/D)

 The steam iron mod. FS454

The industrial steam iron FS454 of 1,8 kg has a monohose, that is a Silicone steam hose of mm 5x10 plus current supply cord fastened together by a Nylon coating, which connects the iron to the boiler.

Its most revolutionary feature is the pressure die-cast aluminium plate with 32 steam chambers. This particular structure permits to eliminate the condense produced in the steam hoses for an anti-drop performance even with a  steam hose of 5,0 metre.

The heating element is directly welded in the plate’s upper part concentrating, in this way, on the counterbalance 2/3 of the weight; by means of this structure the heat can be uniformly given off and the heating element is long-life.

 Its components:

• safety bimetallic thermostat with manual calibration for an exact temperature control

• thermostat for the anti-drop regulation (the plate temperature at the minimum is 60°C)

• handle made of steel bracket to grant sturdiness and a plastic covering with built-in wings as a protection against steam

• anti-perspiration cork handle

• steam button that can be fitted for left-handed, too

• knob for plate temperature regulation and the type of steam: dry or wet

Nominal boiler capacity: liters 2,5 , Boiler power: 1000W, Working pressure: bar 2,5, Max pressure : bar 3,5